Engine, Goods & Storage Sheds

With built-on loading crane and canopy. To be used on railway pre­mises or, e.g., as a repair materials store. 222 x 140 x 71mm

As it can be found in the country with wooden lagging, loading rack and canopy. This building kit contains: 98 single parts in 9 colours, window parts, 1 paper mask, 1 decoration and 1 construction instruction. 209 x 82 x 90mm

Space for vehicles up to 250 mm length over buffers.   The chimney of the workshop outbuilding is ready for using a smoke generator (Seuthe no. 7).   A particularly important feature of this model is the pass-through option, as both end...

With 2 shelters for locomotives up to 190 mm length over buffer.   The gates can be opened and closed manually.   This building kit contains: 168 single parts in 4 colours, window parts and 1 construction instruction.   Clearance of...

Bricks-and-mortar-built, with 2 shelters for locomotives up to 270 mm length over buffer.   The gates are automatically closed by the arriving locomotives and again opened when departing. Catenary operation possible.   This building kit...

This annex can be used separately or for the roundhouse.   In the event of a direct entry via the turntable, engines with a length of 290 mm over buffers can be housed in the first stall and engines up to the length over buffers of 220 mm can be...

As a separate engine house or to­gether with roundhouse 120176.   For engines with up to 290 mm length over buffers.   The most com­mon turntables of Märklin, Fleisch­mann and Roco can be used.   Junction track...

Open, transparent glass construction, with three stalls, suitable for engines up to 310 mm length over buffers.   The doors can slowly open and close by building in a drive unit Art. no. 180624. Mechanical parts attached.   Suitable for use...

Two-story federal railway administration building in clinker construction, outside wall, bike stand with bikes and floor plate with parking areas.   This building kit contains: 95 single parts in 6 colours, window foil, 1 paper mask and 1...

Buildings of the Arosa line.   Laser-cut model of the goods shed at »Langwies« station with a stone pedestal, an asymmetric double pitch roof and characteristic ornamental verge boards.   The model’s lateral walls...

Clinker-built construction, masonry plinth and loading platforms. 259 x 143 x 87mm

Wooden construction, with sliding gates and foundation made of natural stone masonry. This building kit contains: 60 single parts in 8 colours, window foil, 1 decoration and 1 construction instruction. 205 x 162 x 102mm